Latest Products http://stovepaint.com Fri, 29 Mar 2024 15:52:27 GMT Fri, 29 Mar 2024 15:52:27 GMT Thurmalox 250 http://stovepaint.com/Products/AT/View/PID/2 Joseph Aucoin 2 <b>Product Name</b>:&nbsp;Thurmalox 250<BR><b>HTML Title</b>:&nbsp;Selective Black Solar Collector Coating<BR><b>SKU</b>:&nbsp;250<BR><b>Short Description</b>:&nbsp;Thurmalox 250 is a selective black silicone-based heat resistant coating designed for use on metal surfaces of solar collector panels.<BR><b>Application Methods</b>:&nbsp;Spray|Brush|Spray Preferred<BR><b>Available Sizes</b>:&nbsp;Aerosol|Quart|1 Gallon<BR><b>Long Description</b>:&nbsp;<p style="text-align: left;">Thurmalox 250 is a selective black silicone-based heat resistant coating designed for use on metal surfaces of solar collector panels. It selectively absorbs solar wave lengths with the greatest heat content (visible and infrared wave lengths) and therefore collects heat energy more efficiently than ordinary nonselective black paints which emit (reflect) a significant amount of incident solar radiation.</p> <p style="text-align: left;">Thurmalox 250 will function with maximum efficiency when used on collector panels having glazed covers. It is unaffected by high heat and humidity and exhibits no outgassing during stagnation periods. See Application and Technical Data sections for additional information.</p> <p style="text-align: left;"> In cases where a non-selective coating is required, Thurmalox 270 Black coating is recommended. See Bulletin 270 for details.</p> <p style="text-align: left;"> For unglazed collectors such as outside surfaces of passive houses and Trombe walls, use Endcor 902 Black Latex passive solar coating. See Bulletin 902 for details.</p><BR><b>Common Uses</b>:&nbsp;• Solar Collector Panels<BR><b>Features</b>:&nbsp;• Selective surface<br />• Resists outgassing to 400°F (204°C)<br />• Heat resistant to 1,000°F (538°C)<br />• Doesn't peel, flake or chalk<br />• Won't bleach or discolor<br />• Withstands repeated thermal cycling<br />• Resistant to UV degradation<br />• Dries for handling in 30 minutes<br />• Air dry or heat cure<br />• Long lasting<br />• Available in 13 oz. (net wt.) aerosol cans<BR><b>Surface Preparation</b>:&nbsp;Aluminum: Prepare surface with Endcor 450 Rust Rinse (see Bulletin 450). Wash thoroughly with water and dry. Apply Thurmalox 250 as noted below.<br /><br />Stainless Steel and Copper: Remove oils and grease by wiping down surface with Dampney 170 Clean-up Thinner.<BR><b>Mixing</b>:&nbsp;Redisperse any settled-out pigments by stirring with a paint paddle followed by thorough mixing to a uniform consistency with an explosion-proof or air-driven power mixer. Do not open containers until ready to use. Keep lid on container when not in use.<BR><b>Application Guidelines</b>:&nbsp;For best results, apply Thurmalox 250 by spray. IMPORTANT: To ensure maximum performance, coating film thickness must be carefully controlled. For maximum selectivity, spray apply a very thin coating, only enough to just hide the metal surface and to make it uniformly black in appearance. Apply only one coat to a maximum dry film thickness of 0.10 mils (0.4 mils wet film thickness - unreduced; 0.8 mils wet film thickness - reduced 1:1 with the recommended Thurmalox thinner. In the case of steel surfaces additional consideration must be given to the potential problems of corrosion and rusting of collector surfaces and appurtenances. Under such circumstances corrosion can be effectively prevented by applying a prime coat of thurmalox 245 Silicone-Zinc Primer prior to application of the Thurmalox 250 Selective Black Coating. The use of thurmalox 245, however, will inhibit the selectivity of the coating system. Apply one coat of Thurmalox 245 to a dry film thickness of 1-1.5 mils. Apply one coat of Thurmalox 250 to a dry film thickness of 1-1.5 mils. Total system dry film thickness: 2-3 mils. See Bulletin 245 for detailed information.<br /><br />NOTE: To ensure maximum performance characteristics, emissivity measurements should be taken as a control procedure. See Selectivity Data in Technical Data section.<BR><b>Application Equipment</b>:&nbsp;Best results are achieved with conventional spray application or aerosol spray. Reduce with equal volume of Dampney 100 Thinner. Adjustments for proper spray patterns may be required.<br /><br />As a guide only...<br /><br />Spray gun - DeVilbiss P-MBC or JGA<br />Air hose - 5/16" (I.D.)<br />*Fluid hose - 3/8" (I.D.)<br />Air cap - 704<br />Fluid nozzle - FX (0.042")<br />Pot pressure - 2-5 lbs.<br />Atomizing pressure - 30-35 lbs.<br />Needle adjustment - Half open<br />Distance from work - 8-19"<br /><br />*Smaller hose diameters, or hose lengths greater than 25 feet may make it necessary to increase pressure.<BR><b>Thinning</b>:&nbsp;Do not apply Thurmalox 250 without thinning. The choice of thinner will influence the coating's average selective characteristics. For optimum selectivity, a slow-evaporating thinner such as Dampney 100 should be used. For production line application where a faster dry time is required, use Dampney 110 Thinner. The fastest thinner available is Dampney 140. NOTE: Fast-evaporating thinners such as Dampney 110 and 140 may promote dry spray, which could result in thicker than recommended films. To ensure the optimum combination of application speed and selective properties, consult your nearest Dampney representative for specific recommendations.<BR><b>Dry Time 70° F (21° C) 50% RH</b>:&nbsp;Thurmalox 250 dries to handle in 30 minutes. For optimum service, coating can be baked one hour at 350-400°F although curing will occur in service.<BR><b>Cleanup</b>:&nbsp;Clean all equipment with Dampney 10 Clean-up, or Thinner, or xylol.<BR><b>Storage</b>:&nbsp;Store Thurmalox 250 in a cool place, preferably below 80°F.<BR><b>Color</b>:&nbsp;Black<BR><b>Curing Requirements</b>:&nbsp;Heat cure at 350°-400°F for 1 hour<BR><b>Temperature Resistant After Cure</b>:&nbsp;1000°F (538°C)<BR><b>Continuous Temperature</b>:&nbsp;Ambient to 500°F (260°C)<BR><b>Components</b>:&nbsp;1<BR><b>Volume Solids</b>:&nbsp;20%<BR><b>Theoretical Coverage</b>:&nbsp;Per Gallon: 320 mil. sq. ft. (7.9 sq. m. / liter)<BR><b>Application Temperature</b>:&nbsp;50-120°F (10-49°C) max. - Spray cans, 75°F (24°C) max.<BR><b>Drying Time to Touch</b>:&nbsp;10-15 minutes<BR><b>Flash Point (Pensky Martens)</b>:&nbsp;81°F (27°C)<BR><b>Weight</b>:&nbsp;Per Gallon: 9.24 lbs. (1.1 kg/liter)<BR> Sat, 22 Mar 2014 08:21:00 GMT Thurmalox 2700 http://stovepaint.com/Products/AT/View/PID/15 Dennis Aikman 15 <b>Product Name</b>:&nbsp;Thurmalox 2700<BR><b>HTML Title</b>:&nbsp;Water Based High Temperature Coating<BR><b>SKU</b>:&nbsp;2700<BR><b>Short Description</b>:&nbsp;High Temperature Water Based Coating <BR><b>Data Sheet</b>:&nbsp;<a href='/Portals/0/PropertyAgent/415/Files/15/2700.pdf'>2700</a><BR><b>Application Methods</b>:&nbsp;Spray|Brush<BR><b>Available Sizes</b>:&nbsp;1 Gallon|5 Gallon<BR><b>Long Description</b>:&nbsp;<p>High Temperature Water Based Paint</p><BR><b>Components</b>:&nbsp;1<BR> Fri, 14 Jul 2017 08:49:00 GMT Thurmalox Series Aerosol Data Sheet http://stovepaint.com/Products/AT/View/PID/17 Dennis Aikman 17 <b>Product Name</b>:&nbsp;Thurmalox Series Aerosol Data Sheet<BR><b>HTML Title</b>:&nbsp;High Temperature Paint <BR><b>SKU</b>:&nbsp;Aerosol Technical Data Sheet<BR><b>Short Description</b>:&nbsp;Technical Data Page for Thurmalox Series packaged in Aerosol cans<BR><b>Data Sheet</b>:&nbsp;<a href='/Portals/0/PropertyAgent/415/Files/17/Aerosols.pdf'>Aerosols</a><BR><b>Application Methods</b>:&nbsp;Spray<BR><b>Components</b>:&nbsp;1<BR> Mon, 20 Nov 2017 13:11:00 GMT Thurmalox 245 Primer http://stovepaint.com/Products/AT/View/PID/4 Joseph Aucoin 4 <b>Product Name</b>:&nbsp;Thurmalox 245 Primer<BR><b>HTML Title</b>:&nbsp;High Temperature Primer<BR><b>SKU</b>:&nbsp;245<BR><b>Warning Label</b>:&nbsp;False<BR><b>Short Description</b>:&nbsp;Thurmalox 245 is the primer for both Thurmalox 270 Series and Thurmalox 280 Aluminum heat resistant topcoats.<BR><b>SDS (Aerosol)</b>:&nbsp;<a href='/Portals/0/PropertyAgent/415/Files/4/245 Aerosol SDS 2020.pdf'>245 Aerosol SDS 2020</a><BR><b>Data Sheet</b>:&nbsp;<a href='/Portals/0/PropertyAgent/415/Files/4/245DataSheet.pdf'>245DataSheet</a><BR><b>Application Methods</b>:&nbsp;Spray|Brush|Roll|Spray Preferred<BR><b>Available Sizes</b>:&nbsp;Aerosol|Quart|1 Gallon<BR><b>Long Description</b>:&nbsp;<p>Thurmalox 245C Primer is a VOC compliant, high temperature, corrosion resistant primer formulated from silicone resins and zinc dust. Thurmalox 245C Primer provides outstanding corrosion protection for metal surfaces operating at temperatures from 500&deg;F (260&deg;C) to 1000&deg;F (538&deg;C), with peaks to 1200&deg;F (648&deg;C). Thurmalox 245C is the primer for Thurmalox 230C series heat resistant topcoats.</p> <p>Thurmalox 245 is the primer for both Thurmalox 230 Series and Thurmalox 280 Aluminum heat resistant topcoats. These primer/topcoat systems have excellent intercoat adhesion and are able to withstand severe thermal shock throughout the entire temperature range.</p> <p style="text-align: center;"><a class="btn btn-lg btn-default" href="https://net4sale.com/zinc-dust-primer"><span class="glyphicon glyphicon-shopping-cart"></span> Buy Online</a></p> <BR><b>Common Uses</b>:&nbsp;• Stacks, breechings, boiler casings<br />• Manifolds, mufflers and exhausts<br />• Hot piping, process vessels, heat exchangers<br />• Refinery equipment - heaters, crackers<br />• Furnaces, ovens<BR><b>Features</b>:&nbsp;• Air dries<br />• Withstands continuous temperature of 1000°F (538°C), with peaks to 1200°F (648°C)<br />• Prevents rusting and streaking of steel during shutdowns<br />• Easily topcoated with Thurmalox 230 Series and Thurmalox 280 Aluminum topcoats<br />• Excellent intercoat adhesion<br />• Protects against weathering and corrosion<br />• Prevents underfilm corrosion attack<BR><b>Not Recommended For</b>:&nbsp;• Immersion service<br />• Direct contact with flame<br />• Cooking surfaces<BR><b>Surface Preparation</b>:&nbsp;1. To ensure optimum long-term coating system performance, surfaces must be clean, dry and free from dirt, oil, grease, salts, welding flux, mill scale, rust, oxides, old paint, corrosion products or other foreign matter.<br />2. Remove all surface imperfections that will induce premature coating system failure. Chip or scrape off weld splatter. Grind down sharp and rough edges.<br />3. Abrasive blast surface per specification SSPC-SP10, “Near-White Blast Cleaning”, or per NACE Standard No.2 to a profile depth of 1.5 - 2.0 mils maximum, with a 1.5 mil anchor pattern being ideal. Abrasive used in blasting should be selected carefully from materials of mesh size required to produce the desired anchor pattern.<br />4. If abrasive blasting is not permitted, prepare surface by power tool cleaning per SSPC-SP 11. Use 3M brand “Heavy Duty Roto Peen”, type C flap wheel cleaning system mounted on an air-driven motor. This method will provide a surface equivalent to that provided by commercial blast cleaning per SSPC-SP6, including the desired surface profile.<br />5. Feather out all edges of adjacent painted surfaces after completion of surface preparation operations and prior to application of the first coat of paint.<BR><b>Mixing</b>:&nbsp;Thurmalox 245 Primer is a two-package system consisting of a base component and zinc that are mixed together before use. Sift zinc dust slowly into base with continuous mechanical agitation. Mix thoroughly until free of lumps. Pour mixture through 30-mesh screen. If a partial unit is needed, mix by weight 10 parts of the Base component with 3 parts Zinc Dust component.<BR><b>Application Guidelines</b>:&nbsp;Surface temperature must be at least 5° F (3° C) above dew point. <BR><b>Application Equipment</b>:&nbsp;Conventional spray is the recommended method of application, however Thurmalox 245 Primer may also be applied by airless spray, brush or roller. Do not apply Thurmalox 245 Primer in heavier films than specified since blistering may occur.<BR><b>Thinning</b>:&nbsp;Only thin Thurmalox 245 Primer with Dampney 100 Thinner. <br />Note: Use of other thinners not approved by Dampney may hinder product performance and void product warranty. <BR><b>Cleanup</b>:&nbsp;Thoroughly flush spray equipment and hoses immediately after use with Dampney 100 Thinner. Dismantle spray equipment and clean parts, brushes and rollers with Dampney 100 Thinner. <BR><b>Storage</b>:&nbsp;Store in cool, dry place with temperature between 50°F and 100° F (10°C and 38°C). Keep container closed when not in use. <BR><b>Precautionary Information</b>:&nbsp;WARNING: Flammable Liquid and Vapor . Keep away from heat, sparks and flame. Vapors may cause flash fire. Do not breathe vapors or spray mist. Avoid contact with eyes, skin and clothing. Use with adequate ventilation during mixing and application. Wear an appropriate, properly fitted organic vapor cartridge-type respirator (NIOSH approved) during and after application unless air monitoring demonstrates vapor/mist levels are below applicable limits. Follow respirator manufacturer’s directions for respirator use. Wash thoroughly after handling. Wear protective gloves, chemical safety goggles and impervious protective clothing. Use skin cream. In confined spaces it is required to use a positive pressure supplied-air respirator (NIOSH approved). Use explosion-proof lights and electrical equipment. Use only nonsparking tools and equipment. Wear conductive and nonsparking footwear. Make certain all electrical equipment is grounded. Observe all safety precautions and follow procedures described in OSHA regulations. See Material Safety Data Sheet (MSDS) for complete precautionary and disposal information. If instructions and warnings cannot be strictly followed, do not use this product. <BR><b>Components</b>:&nbsp;2<BR> Sat, 22 Mar 2014 08:41:00 GMT Solar Coating http://stovepaint.com/Products/AT/View/PID/7 Joseph Aucoin 7 <b>Product Name</b>:&nbsp;Solar Coating<BR><b>HTML Title</b>:&nbsp;Thurmalox 250 Selective Black Solar Collector Coating<BR><b>SKU</b>:&nbsp;OEM-250<BR><b>Warning Label</b>:&nbsp;False<BR><b>Short Description</b>:&nbsp;Thurmalox 250 is a selective black silicone-based heat resistant coating designed for use on metal surfaces of solar collector panels.<BR><b>SDS (Aerosol)</b>:&nbsp;<a href='/Portals/0/PropertyAgent/415/Files/7/250 Aerosol SDS 2020.pdf'>250 Aerosol SDS 2020</a><BR><b>Application Methods</b>:&nbsp;Spray|Brush|Spray Preferred<BR><b>Available Sizes</b>:&nbsp;Aerosol|Quart|1 Gallon<BR><b>Long Description</b>:&nbsp;<p style="text-align: left;">Thurmalox 250 is a selective black silicone-based heat resistant coating designed for use on metal surfaces of solar collector panels. It selectively absorbs solar wave lengths with the greatest heat content (visible and infrared wave lengths) and therefore collects heat energy more efficiently than ordinary nonselective black paints which emit (reflect) a significant amount of incident solar radiation.</p> <p style="text-align: left;">Thurmalox 250 will function with maximum efficiency when used on collector panels having glazed covers. It is unaffected by high heat and humidity and exhibits no outgassing during stagnation periods. See Application and Technical Data sections for additional information.</p> <p style="text-align: left;">In cases where a non-selective coating is required, Thurmalox 270 Black coating is recommended. See Bulletin 270 for details.</p> <p style="text-align: left;">For unglazed collectors such as outside surfaces of passive houses and Trombe walls, use Endcor 902 Black Latex passive solar coating. See Bulletin 902 for details.</p> <BR><b>Common Uses</b>:&nbsp;• Solar Collector Panels<BR><b>Features</b>:&nbsp;• Selective surface<br />• Resists outgassing to 400°F (204°C)<br />• Heat resistant to 1,000°F (538°C)<br />• Doesn't peel, flake or chalk<br />• Won't bleach or discolor<br />• Withstands repeated thermal cycling<br />• Resistant to UV degradation<br />• Dries for handling in 30 minutes<br />• Air dry or heat cure<br />• Long lasting<br />• Available in 13 oz. (net wt.) aerosol cans<BR><b>Surface Preparation</b>:&nbsp;Aluminum: Prepare surface with Endcor 450 Rust Rinse (see Bulletin 450). Wash thoroughly with water and dry. Apply Thurmalox 250 as noted below.<br /><br />Stainless Steel and Copper: Remove oils and grease by wiping down surface with Dampney 170 Clean-up Thinner.<BR><b>Mixing</b>:&nbsp;Redisperse any settled-out pigments by stirring with a paint paddle followed by thorough mixing to a uniform consistency with an explosion-proof or air-driven power mixer. Do not open containers until ready to use. Keep lid on container when not in use.<BR><b>Application Guidelines</b>:&nbsp;For best results, apply Thurmalox 250 by spray. IMPORTANT: To ensure maximum performance, coating film thickness must be carefully controlled. For maximum selectivity, spray apply a very thin coating, only enough to just hide the metal surface and to make it uniformly black in appearance. Apply only one coat to a maximum dry film thickness of 0.10 mils (0.4 mils wet film thickness - unreduced; 0.8 mils wet film thickness - reduced 1:1 with the recommended Thurmalox thinner. In the case of steel surfaces additional consideration must be given to the potential problems of corrosion and rusting of collector surfaces and appurtenances. Under such circumstances corrosion can be effectively prevented by applying a prime coat of thurmalox 245 Silicone-Zinc Primer prior to application of the Thurmalox 250 Selective Black Coating. The use of thurmalox 245, however, will inhibit the selectivity of the coating system. Apply one coat of Thurmalox 245 to a dry film thickness of 1-1.5 mils. Apply one coat of Thurmalox 250 to a dry film thickness of 1-1.5 mils. Total system dry film thickness: 2-3 mils. See Bulletin 245 for detailed information.<br /><br />NOTE: To ensure maximum performance characteristics, emissivity measurements should be taken as a control procedure. See Selectivity Data in Technical Data section.<BR><b>Application Equipment</b>:&nbsp;Best results are achieved with conventional spray application or aerosol spray. Reduce with equal volume of Dampney 100 Thinner. Adjustments for proper spray patterns may be required.<br /><br />As a guide only...<br /><br />Spray gun - DeVilbiss P-MBC or JGA<br />Air hose - 5/16" (I.D.)<br />*Fluid hose - 3/8" (I.D.)<br />Air cap - 704<br />Fluid nozzle - FX (0.042")<br />Pot pressure - 2-5 lbs.<br />Atomizing pressure - 30-35 lbs.<br />Needle adjustment - Half open<br />Distance from work - 8-19"<br /><br />*Smaller hose diameters, or hose lengths greater than 25 feet may make it necessary to increase pressure.<BR><b>Thinning</b>:&nbsp;Do not apply Thurmalox 250 without thinning. The choice of thinner will influence the coating's average selective characteristics. For optimum selectivity, a slow-evaporating thinner such as Dampney 100 should be used. For production line application where a faster dry time is required, use Dampney 110 Thinner. The fastest thinner available is Dampney 140. NOTE: Fast-evaporating thinners such as Dampney 110 and 140 may promote dry spray, which could result in thicker than recommended films. To ensure the optimum combination of application speed and selective properties, consult your nearest Dampney representative for specific recommendations.<BR><b>Dry Time 70° F (21° C) 50% RH</b>:&nbsp;Thurmalox 250 dries to handle in 30 minutes. For optimum service, coating can be baked one hour at 350-400°F although curing will occur in service.<BR><b>Cleanup</b>:&nbsp;Clean all equipment with Dampney 10 Clean-up, or Thinner, or xylol.<BR><b>Storage</b>:&nbsp;Store Thurmalox 250 in a cool place, preferably below 80°F.<BR><b>Color</b>:&nbsp;Black<BR><b>Curing Requirements</b>:&nbsp;Heat cure at 350°-400°F for 1 hour<BR><b>Temperature Resistant After Cure</b>:&nbsp;1000°F (538°C)<BR><b>Continuous Temperature</b>:&nbsp;Ambient to 500°F (260°C)<BR><b>Components</b>:&nbsp;1<BR><b>Volume Solids</b>:&nbsp;20%<BR><b>Theoretical Coverage</b>:&nbsp;Per Gallon: 320 mil. sq. ft. (7.9 sq. m. / liter)<BR><b>Application Temperature</b>:&nbsp;50-120°F (10-49°C) max. - Spray cans, 75°F (24°C) max.<BR><b>Drying Time to Touch</b>:&nbsp;10-15 minutes<BR><b>Flash Point (Pensky Martens)</b>:&nbsp;81°F (27°C)<BR><b>Weight</b>:&nbsp;Per Gallon: 9.24 lbs. (1.1 kg/liter)<BR> Sat, 22 Mar 2014 08:21:00 GMT Thurmalox 270-02 Semi Gloss Black http://stovepaint.com/Products/AT/View/PID/3 Joseph Aucoin 3 <b>Product Name</b>:&nbsp;Thurmalox 270-02 Semi Gloss Black<BR><b>HTML Title</b>:&nbsp;Semi Gloss high temp paint<BR><b>SKU</b>:&nbsp;270-02<BR><b>Warning Label</b>:&nbsp;False<BR><b>Short Description</b>:&nbsp;Thurmalox 270 series coatings are high temperature, fast drying formulations specifically designed to protect stoves (wood, coal, gas, pellet, etc.), hearth equipment and other metal surfaces operating at temperatures up to 1200°F.<BR><b>SDS (Aerosol)</b>:&nbsp;<a href='/Portals/0/PropertyAgent/415/Files/3/270-02 SDS 04252022.pdf'>270-02 SDS 04252022</a><BR><b>SDS (Bulk)</b>:&nbsp;<a href='/Portals/0/PropertyAgent/415/Files/3/270 SDS 04212022.pdf'>270 SDS 04212022</a><BR><b>Data Sheet</b>:&nbsp;<a href='/Portals/0/PropertyAgent/415/Files/3/stovepaintdatasheet.pdf'>stovepaintdatasheet</a><BR><b>Application Methods</b>:&nbsp;Spray|Brush|Roll|Spray Preferred<BR><b>News Article Tags</b>:&nbsp;Thurmalox<BR><b>Available Sizes</b>:&nbsp;Aerosol|Pint|Quart|1 Gallon|5 Gallon|35 Gallon|55 Gallon<BR><b>Long Description</b>:&nbsp;<p style="text-align: left;">Thurmalox 270 series coatings are high temperature, fast drying formulations based on silicone resins and thermally stable pigments. They are formulated specifically to protect stoves (wood, coal, gas, pellet, etc.), hearth equipment and other metal surfaces operating at temperatures up to 1200&deg;F (648&deg;C). Thurmalox 270 series coatings provide outstanding adhesion, film integrity, color stability and thermal shock resistance throughout this entire temperature range. For exterior applications, use Thumalox 245 Primer on bare metal surface to seal and prevent rust.</p> <p style="text-align: left;"><strong>Recommended Uses</strong></p> <ul> <li>Stoves (wood, coal, pellet, gas, etc.)</li> <li>Stove pipe</li> <li>Free-standing fireplaces and fireplace inserts</li> <li>Fireplace hoods, screens, and accessories</li> <li>Furnaces and heaters</li> <li>Engines, manifolds, mufflers</li> </ul> <p>&nbsp;<strong>Features</strong></p> <ul> <li>Withstands intense heat to 1200&deg;F (648&deg;C)</li> <li>Will not peel, flake or chalk</li> <li>Won&rsquo;t bleach or discolor</li> <li>Withstands repeated thermal cycling</li> <li>Dries for handling in 15 minutes</li> <li>Long-lasting</li> <li>Available in quarts and gallons</li> <li>Resistant to scratching and marring</li> </ul> <p>Thurmalox 270 series coatings are available in multiple colors. See 270/290 Series available&nbsp;at<em> <a href="https://net4sale.com/stove-paint-colors">www.Net4Sale.com</a>.</em></p> <p><strong>Not Recommended For:</strong></p> <ul> <li>Immersion service</li> <li>Direct contact with flame</li> <li>Cooking surfaces</li> <li>Porcelain surfaces</li> </ul> <p style="text-align: left;"><strong>Surface Preparation</strong></p> <ol> <li> <p style="text-align: left;">To ensure optimum long term coating system performance, surfaces must be clean, dry and free from dirt, oil grease, salts, welding flux, oxides, old paint or other foreign matter.</p> </li> <li> <p style="text-align: left;">Prepare surface by power washing, vapor degreasing, solvent cleaning or other chemical and mechanical methods.</p> </li> <li> <p style="text-align: left;">Surface cleaning methods recommended will depend upon type of foreign matter to be removed and condition of substrate. Consult Dampney Technical Service for specific recommendations.</p> </li> </ol> <p>&nbsp;</p> <p><strong>Mixing</strong></p> <p style="text-align: left;">Shake can vigorously for one minute until mixing ball begins to rattle.</p> <p>&nbsp;</p> <p><strong>Application Guidelines</strong></p> <ol> <li> <p style="text-align: left;">Hold can no closer than 10-12 inches from surface to be sprayed.</p> </li> <li> <p style="text-align: left;">Apply two light coats, allowing 10 minutes drying time between coats. Clean spray head immediately after use by turning can upside down and spraying until no more paint appears. If clogging occurs, remove spray head and clean with a fine wire. Replace carefully, pointing can and spray head opening away from you.</p> </li> <li> <p style="text-align: left;">The number of coats of Thurmalox 270 series coatings needed depends upon service conditions of equipment.</p> </li> </ol> <p><strong>Dry time</strong></p> <p style="text-align: left;">Thurmalox 270 series coatings will air dry tack and thumb print free in 15 minutes and will dry hard in 8 to 12 hours. Allow 1 hour minimum dry time between coats at 70&deg;F (21&deg;C) and 1/2 hour minimum dry time between coats at 90&deg;F (32&deg;C). Coating has excellent recoat properties. <strong>Heat curing will provide optimum film properties. Provide ventilation when firing unit for the first time after painting.</strong></p> <p><strong>Cleanup</strong></p> <p>Clean up tools with acetone, MEK or toluene.</p> <p><strong>Storage</strong></p> <p>Store in cool, dry place with temperature between 50&deg;F and 100&deg;F (10&deg;C and 38&deg;C).</p> <p><strong>Precautionary Information</strong></p> <p><strong>WARNING</strong>: Flammable Liquid and Vapor Keep away from heat, sparks and flame. Vapors may cause flash fire. Do not breathe vapors or spray mist. Avoid contact with eyes, skin and clothing. Use with adequate ventilation during mixing and application. Observe all safety precautions and follow procedures described in OSHA regulations. Do not paint on hot surfaces.</p> <table border="1" cellpadding="2" cellspacing="1"> <tbody> <tr> <td><strong>Characteristics</strong></td> <td><strong>Thurmalox 270 Aerosol </strong></td> </tr> <tr> <td>Generic Type</td> <td>Silicone</td> </tr> <tr> <td>Color</td> <td>Black, Satin Black and custom colors (see stove paint colors at <a href="https://net4sale.com/stove-paint-colors">www.Net4Sale.com</a>)</td> </tr> <tr> <td>Finish</td> <td>Low sheen, satin black, metallic and clear gloss</td> </tr> <tr> <td>Temperature resistance</td> <td>&nbsp;</td> </tr> <tr> <td align="right">Continuous&nbsp;&nbsp;</td> <td>1000&deg;F (538&deg;C)</td> </tr> <tr> <td align="right">Intermittent&nbsp;&nbsp;</td> <td>1200&deg;F (649&deg;C)</td> </tr> <tr> <td>Theoretical coverage per 12 oz. can</td> <td valign="top">7-8 square feet per can</td> </tr> <tr> <td>Application temperature @ 50% RH</td> <td valign="top">60-90&deg;F (16-32&deg;C)</td> </tr> <tr> <td>Drying time @ 70&deg;F (21&deg;C) 50% RH</td> <td>&nbsp;</td> </tr> <tr> <td align="right">To touch&nbsp;&nbsp;</td> <td>15-20 minutes</td> </tr> <tr> <td align="right">To handle&nbsp;&nbsp;</td> <td>20-30 minutes</td> </tr> <tr> <td align="right">To recoat&nbsp;&nbsp;</td> <td>1-2 hours</td> </tr> <tr> <td>Cure time</td> <td>fire unit for full cure (after 24 hour air dry)</td> </tr> <tr> <td>Shelf life</td> <td>1 year</td> </tr> </tbody> </table> <BR><b>Common Uses</b>:&nbsp;• Stoves (wood, coal, pellet, gas, etc.) <br />• Stove pipe <br />• Free-standing fireplaces and fireplace inserts <br />• Fireplace hoods, screens, and accessories <br />• Furnaces and heaters <br />• Engines, manifolds, mufflers <BR><b>Features</b>:&nbsp;• Withstands intense heat to 1200° F (648° C)<br />• Will not peel, flake or chalk<br />• Won’t bleach or discolor<br />• Withstands repeated thermal cycling<br />• Dries for handling in 15 minutes<br />• Long-lasting<br />• Available 12 oz. aerosol cans for touch-up<br />• Resistant to scratching and marring<BR><b>Not Recommended For</b>:&nbsp;• Immersion service<br />• Direct contact with flame<br />• Cooking surfaces<br />• Porcelain surfaces<BR><b>Surface Preparation</b>:&nbsp;To ensure optimum long term coating system performance, surfaces must be clean, dry and free from dirt, oil grease, salts, welding flux, oxides, old paint or other foreign matter.<br /><br />Prepare surface by power washing, vapor degreasing, solvent cleaning or other chemical and mechanical methods.<br /><br />Surface cleaning methods recommended will depend upon type of foreign matter to be removed and condition of substrate. Consult Dampney Technical Service for specific recommendations.<BR><b>Mixing</b>:&nbsp;Redisperse any settled pigments by stirring with a paint paddle followed by thorough mixing to a uniform consistency with an explosion-proof or sir-driven power mixer. Do not open containers until ready to use. Keep lid on container when not in use.<BR><b>Application Guidelines</b>:&nbsp;One coat of Thurmalox 270 series coatings at 1.0 mil (25 microns) is suitable for use on stoves and other hearth accessories.<br /><br />For optimum protection apply two coats of Thurmalox 270 series coatings to a dry film thickness of 1.0 mil (25 microns) per coat. Total recommended dry film thickness is 2.0 mils (50 microns).<br /><br />The number of coats of Thurmalox 270 series coatings needed depends upon service conditions of equipment. <BR><b>Application Equipment</b>:&nbsp;Apply by airless, conventional or HVLP spray methods. Application by roller is not recommended. Application by brush is also not recommended except for porous surfaces such as cast iron.<BR><b>Thinning</b>:&nbsp;Only thin Thurmalox 270 series coating with Dampney 100 thinner.<br />Note: Use of other thinners not approved by Dampney may hinder product performance and void product warranty.<BR><b>Dry Time 70° F (21° C) 50% RH</b>:&nbsp;Thurmalox 270 series coatings will air dry tack and thumb print free in 15 minutes and will dry hard in 8 to 12 hours. Allow 1 hour minimum dry time between coats at 70° F (21° C) and 1/2 hour minimum dry time between coats at 90° F (32° C). Coating has excellent recoat properties. <BR><b>Cleanup</b>:&nbsp;Thoroughly flush spray equipment and hoses immediately after use with Dampney 100 Thinner. Dismantle spray equipment and clean parts, brushes and rollers with Dampney 100 Thinner. <BR><b>Storage</b>:&nbsp;Store in cool, dry place with temperature between 50°F and 100° F (10°C and 38°C). Keep container closed when not in use. <BR><b>Precautionary Information</b>:&nbsp;WARNING: Flammable Liquid and Vapor Keep away from heat, sparks and flame. Vapors may cause flash fire. Do not breathe vapors or spray mist. Avoid contact with eyes, skin and clothing. Use with adequate ventilation during mixing and application. Wear an appropriate, properly fitted organic vapor cartridge-type respirator (NIOSH/MSHA approved) during and after application unless air monitoring demonstrates vapor/mist levels are below applicable limits. Follow respirator manufacturer’s directions for respirator use. Wash thoroughly after handling. Wear protective gloves, chemical safety goggles and impervious protective clothing. Use skin cream. In confined spaces it is required to use a positive pressure supplied-air respirator (NIOSH/MSHA approved). Use explosion-proof lights and electrical equipment. Use only nonsparking tools and equipment. Wear conductive and nonsparking footwear. Make certain all<br />electrical equipment is grounded. Observe all safety precautions and follow procedures described in OSHA regulations. See Material Safety Data Sheet (MSDS) for complete precautionary and disposal information. If instructions and warnings cannot be strictly followed, do not use this product.<br /><br />FOR INDUSTRIAL USE ONLY<BR><b>Generic Type</b>:&nbsp;Silicone<BR><b>Color</b>:&nbsp;Black, See color card. Also available in custom colors.<BR><b>Intermittent Peak Temperature</b>:&nbsp;1200° F<BR><b>Components</b>:&nbsp;1<BR> Sat, 22 Mar 2014 08:32:00 GMT Thurmalox 290 Series Colors http://stovepaint.com/Products/AT/View/PID/6 Joseph Aucoin 6 <b>Product Name</b>:&nbsp;Thurmalox 290 Series Colors<BR><b>HTML Title</b>:&nbsp;Thurmalox 290 Colors - High Temperature Paint<BR><b>SKU</b>:&nbsp;290<BR><b>Warning Label</b>:&nbsp;False<BR><b>Short Description</b>:&nbsp;Thurmalox 290 series coatings are high temperature, fast drying formulations specifically designed to protect stoves (wood, coal, gas, pellet, etc.), hearth equipment and other metal surfaces operating at temperatures up to 1200°F.<BR><b>SDS (Aerosol)</b>:&nbsp;<a href='/Portals/0/PropertyAgent/415/Files/6/290 SDS 12292021.pdf'>290 SDS 12292021</a><BR><b>SDS (Bulk)</b>:&nbsp;<a href='/Portals/0/PropertyAgent/415/Files/6/290BulkMSDS.pdf'>290BulkMSDS</a><BR><b>Data Sheet</b>:&nbsp;<a href='/Portals/0/PropertyAgent/415/Files/6/290 bulletin 0421.pdf'>290 bulletin 0421</a><BR><b>Application Methods</b>:&nbsp;Spray|Brush|Spray Preferred<BR><b>Long Description</b>:&nbsp;<p style="text-align: left;">Thurmalox 290 series coatings are high temperature, fast drying formulations based on silicone resins and thermally stable pigments. They are formulated specifically to protect stoves (wood, coal, gas, pellet, etc.), hearth equipment and other metal surfaces operating at temperatures up to 1200&deg;F (648&deg;C). Thurmalox 290 series coatings provide outstanding adhesion, film integrity, color stability and thermal shock resistance throughout this entire temperature range. For exterior applications, use <a href="/Products/AT/View/PID/4/Thurmalox-245-Primer">Thumalox 245 Primer</a> on bare metal surface to seal and prevent rust.</p> <BR><b>Common Uses</b>:&nbsp;• Stoves (wood, coal, pellet, gas, etc.) <br />• Stove pipe <br />• Free-standing fireplaces and fireplace inserts <br />• Fireplace hoods, screens, and accessories <br />• Furnaces and heaters <br />• Engines, manifolds, mufflers <BR><b>Features</b>:&nbsp;• Withstands intense heat to 1200° F (648° C)<br />• Will not peel, flake or chalk<br />• Won’t bleach or discolor<br />• Withstands repeated thermal cycling<br />• Dries for handling in 15 minutes<br />• Long-lasting<br />• Available 12 oz. aerosol cans for touch-up<br />• Resistant to scratching and marring<BR><b>Not Recommended For</b>:&nbsp;• Immersion service<br />• Direct contact with flame<br />• Cooking surfaces<br />• Porcelain surfaces<BR><b>Surface Preparation</b>:&nbsp;<br />1. To ensure optimum long term coating system performance, surfaces must be clean, dry and free from dirt, oil grease, salts, welding flux, oxides, old paint or other foreign matter.<br /><br />2. Prepare surface by power washing, vapor degreasing, solvent cleaning or other chemical and mechanical methods.<br /><br />3. Surface cleaning methods recommended will depend upon type of foreign matter to be removed and condition of substrate. Consult Dampney Technical Service for specific recommendations.<BR><b>Mixing</b>:&nbsp;Aerosol - Shake can vigorously for one minute until mixing ball begins to rattle.<br /><br />Bulk - Redisperse any settled pigments by stirring with a paint paddle followed by thorough mixing to a uniform consistency with an explosion-proof or sir-driven power mixer. Do not open containers until ready to use. Keep lid on container when not in use.<BR><b>Application Guidelines</b>:&nbsp;One coat of Thurmalox 290 series coatings at 1.0 mil (25 microns) is suitable for use on stoves and other hearth accessories.<br /><br />For optimum protection apply two coats of Thurmalox 290 series coatings to a dry film thickness of 1.0 mil (25 microns) per coat. Total recommended dry film thickness is 2.0 mils (50 microns).<br /><br />The number of coats of Thurmalox 290 series coatings needed depends upon service conditions of equipment. <BR><b>Application Equipment</b>:&nbsp;Apply by airless, conventional or HVLP spray methods. Application by roller is not recommended. Application by brush is also not recommended except for porous surfaces such as cast iron.<BR><b>Thinning</b>:&nbsp;Only thin Thurmalox 290 series coating with Dampney 100 thinner.<br />Note: Use of other thinners not approved by Dampney may hinder product performance and void product warranty.<BR><b>Dry Time 70° F (21° C) 50% RH</b>:&nbsp;Thurmalox 290 series coatings will air dry tack and thumb print free in 15 minutes and will dry hard in 8 to 12 hours. Allow 1 hour minimum dry time between coats at 70° F (21° C) and 1/2 hour minimum dry time between coats at 90° F (32° C). Coating has excellent recoat properties. <BR><b>Cleanup</b>:&nbsp;Thoroughly flush spray equipment and hoses immediately after use with Dampney 100 Thinner. Dismantle spray equipment and clean parts, brushes and rollers with Dampney 100 Thinner. <BR><b>Storage</b>:&nbsp;Store in cool, dry place with temperature between 50°F and 100° F (10°C and 38°C). Keep container closed when not in use. <BR><b>Precautionary Information</b>:&nbsp;WARNING: Flammable Liquid and Vapor Keep away from heat, sparks and flame. Vapors may cause flash fire. Do not breathe vapors or spray mist. Avoid contact with eyes, skin and clothing. Use with adequate ventilation during mixing and application. Wear an appropriate, properly fitted organic vapor cartridge-type respirator (NIOSH/MSHA approved) during and after application unless air monitoring demonstrates vapor/mist levels are below applicable limits. Follow respirator manufacturer’s directions for respirator use. Wash thoroughly after handling. Wear protective gloves, chemical safety goggles and impervious protective clothing. Use skin cream. In confined spaces it is required to use a positive pressure supplied-air respirator (NIOSH/MSHA approved). Use explosion-proof lights and electrical equipment. Use only nonsparking tools and equipment. Wear conductive and nonsparking footwear. Make certain all electrical equipment is grounded. Observe all safety precautions and follow procedures described in OSHA regulations. See Material Safety Data Sheet (MSDS) for complete precautionary and disposal information. If instructions and warnings cannot be strictly followed, do not use this product.<BR><b>Generic Type</b>:&nbsp;Silicone<BR><b>Color</b>:&nbsp;Black, See color card. Also available in custom colors.<BR><b>Curing Requirements</b>:&nbsp;Fire unit for full cure (after 24 hour air dry)<BR><b>Intermittent Peak Temperature</b>:&nbsp;1200°F<BR><b>Continuous Temperature</b>:&nbsp;1000°F (538°C)<BR><b>Components</b>:&nbsp;1<BR><b>Theoretical Coverage</b>:&nbsp;7-8 square feet per 12 oz. Aerosol Can<BR><b>Application Temperature</b>:&nbsp;60-90°F (16-32°C)<BR><b>Drying Time to Touch</b>:&nbsp;15-20 minutes<BR><b>Drying Time to Recoat</b>:&nbsp;1-2 hours<BR><b>Drying Time to Handle</b>:&nbsp;20-30 minutes<BR> Sat, 22 Mar 2014 08:32:00 GMT Thurmalox 293 Clear http://stovepaint.com/Products/AT/View/PID/1 Joseph Aucoin 1 <b>Product Name</b>:&nbsp;Thurmalox 293 Clear<BR><b>HTML Title</b>:&nbsp;Clear Gloss High Temperature Paint<BR><b>SKU</b>:&nbsp;293<BR><b>Warning Label</b>:&nbsp;False<BR><b>Short Description</b>:&nbsp;Thurmalox 293 is a heat-resistant, fast-drying, silicone-based clear lacquer formulated to prevent tarnishing, discoloration and finger printing of metal parts used at elevated temperatures on items such as woodstoves, fireplace closures and other OEM applications. Thurmalox 293 fills the need for a finish which retains its clarity to 650°F (343°C) and its film integrity to 1000°F (538 °C).<BR><b>SDS (Aerosol)</b>:&nbsp;<a href='/Portals/0/PropertyAgent/415/Files/1/293 SDS 2021.pdf'>293 SDS 2021</a><BR><b>Data Sheet</b>:&nbsp;<a href='/Portals/0/PropertyAgent/415/Files/1/Thurmalox-293_DataSheet.pdf'>Thurmalox-293_DataSheet</a><BR><b>Application Methods</b>:&nbsp;Spray|Brush|Spray Preferred<BR><b>Available Sizes</b>:&nbsp;Aerosol|Quart|1 Gallon<BR><b>Long Description</b>:&nbsp;<p>Thurmalox 293 is a heat-resistant, fast-drying, silicone-based clear lacquer formulated to prevent tarnishing, discoloration and finger printing of metal parts used at elevated temperatures on items such as wood stoves, fireplace closures and other OEM applications. Thurmalox 293 fills the need for a finish which retains its clarity to 650&deg;F (343&deg;C) and its film integrity to 1000&deg;F (538 &deg;C).</p> <BR><b>Common Uses</b>:&nbsp;A clear gloss stove paint which can be used as a clear coating or a topcoat over our other colors to get a glossy finish.<BR><b>Generic Type</b>:&nbsp;Silicone<BR><b>Color</b>:&nbsp;Clear<BR><b>Components</b>:&nbsp;1<BR><b>Volume Solids</b>:&nbsp;16.0<BR><b>Dry Film Thickness per coat</b>:&nbsp;0.75 - 1.0 mils (19 - 25 microns)<BR><b>Wet Film Thickness per coat</b>:&nbsp;4- 5 mils (100 - 125 microns)<BR><b>Theoretical Coverage</b>:&nbsp;255 mil. sq. ft. (23.7 sq. m. @ 25 microns) per gallon<BR><b>Application Temperature</b>:&nbsp;60-90° F (16-32° C)<BR><b>Drying Time to Touch</b>:&nbsp;15-20 minutes<BR><b>Drying Time to Recoat</b>:&nbsp;1-2 hours<BR><b>VOC Content</b>:&nbsp;6.1 lb./gal. (731 g./l.)<BR> Wed, 21 Aug 2013 04:42:00 GMT Thurmalox 282 Stainless Steel http://stovepaint.com/Products/AT/View/PID/16 Joseph Aucoin 16 <b>Product Name</b>:&nbsp;Thurmalox 282 Stainless Steel<BR><b>HTML Title</b>:&nbsp;High Temperature Paint<BR><b>SKU</b>:&nbsp;282<BR><b>Warning Label</b>:&nbsp;True<BR><b>Short Description</b>:&nbsp;Thurmalox 282 Stainless Steel series coatings are high temperature, fast drying formulations specifically designed to protect stoves (wood, coal, gas, pellet, etc.), hearth equipment and other metal surfaces operating at temperatures up to 1200°F.<BR><b>SDS (Aerosol)</b>:&nbsp;<a href='/Portals/0/PropertyAgent/415/Files/16/282 SDS 011822.pdf'>282 SDS 011822</a><BR><b>Data Sheet</b>:&nbsp;<a href='/Portals/0/PropertyAgent/415/Files/3/stovepaintdatasheet.pdf'>stovepaintdatasheet</a><BR><b>Application Methods</b>:&nbsp;Spray|Brush|Roll|Spray Preferred<BR><b>News Article Tags</b>:&nbsp;Thurmalox<BR><b>Available Sizes</b>:&nbsp;Aerosol|Pint|Quart|1 Gallon|5 Gallon|35 Gallon|55 Gallon<BR><b>Long Description</b>:&nbsp;<p style="text-align: left;">Thurmalox 282 series coatings are high temperature, fast drying formulations based on silicone resins and thermally stable pigments. They are formulated specifically to protect stoves (wood, coal, gas, pellet, etc.), hearth equipment and other metal surfaces operating at temperatures up to 1200&deg;F (648&deg;C). Thurmalox 270 series coatings provide outstanding adhesion, film integrity, color stability and thermal shock resistance throughout this entire temperature range. For exterior applications, use Thumalox 245 Primer on bare metal surface to seal and prevent rust.</p> <p style="text-align: left;"><strong>Recommended Uses</strong></p> <ul> <li>Stoves (wood, coal, pellet, gas, etc.)</li> <li>Stove pipe</li> <li>Free-standing fireplaces and fireplace inserts</li> <li>Fireplace hoods, screens, and accessories</li> <li>Furnaces and heaters</li> <li>Engines, manifolds, mufflers</li> </ul> <p>&nbsp;<strong>Features</strong></p> <ul> <li>Withstands intense heat to 1200&deg;F (648&deg;C)</li> <li>Will not peel, flake or chalk</li> <li>Won&rsquo;t bleach or discolor</li> <li>Withstands repeated thermal cycling</li> <li>Dries for handling in 15 minutes</li> <li>Long-lasting</li> <li>Available in quarts and gallons</li> <li>Resistant to scratching and marring</li> </ul> <p>Thurmalox 270 series coatings are available in multiple colors. See 270 Series available&nbsp;at<em> <a href="https://net4sale.com/high-temperature-stove-paint">www.Net4Sale.com</a>.</em></p> <p><strong>Not Recommended For:</strong></p> <ul> <li>Immersion service</li> <li>Direct contact with flame</li> <li>Cooking surfaces</li> <li>Porcelain surfaces</li> </ul> <p style="text-align: left;"><strong>Surface Preparation</strong></p> <ol> <li> <p style="text-align: left;">To ensure optimum long term coating system performance, surfaces must be clean, dry and free from dirt, oil grease, salts, welding flux, oxides, old paint or other foreign matter.</p> </li> <li> <p style="text-align: left;">Prepare surface by power washing, vapor degreasing, solvent cleaning or other chemical and mechanical methods.</p> </li> <li> <p style="text-align: left;">Surface cleaning methods recommended will depend upon type of foreign matter to be removed and condition of substrate. Consult Dampney Technical Service for specific recommendations.</p> </li> </ol> <p>&nbsp;</p> <p><strong>Mixing</strong></p> <p style="text-align: left;">Shake can vigorously for one minute until mixing ball begins to rattle.</p> <p>&nbsp;</p> <p><strong>Application Guidelines</strong></p> <ol> <li> <p style="text-align: left;">Hold can no closer than 10-12 inches from surface to be sprayed.</p> </li> <li> <p style="text-align: left;">Apply two light coats, allowing 10 minutes drying time between coats. Clean spray head immediately after use by turning can upside down and spraying until no more paint appears. If clogging occurs, remove spray head and clean with a fine wire. Replace carefully, pointing can and spray head opening away from you.</p> </li> <li> <p style="text-align: left;">The number of coats of Thurmalox 270 series coatings needed depends upon service conditions of equipment.</p> </li> </ol> <p><strong>Dry time</strong></p> <p style="text-align: left;">Thurmalox 270 series coatings will air dry tack and thumb print free in 15 minutes and will dry hard in 8 to 12 hours. Allow 1 hour minimum dry time between coats at 70&deg;F (21&deg;C) and 1/2 hour minimum dry time between coats at 90&deg;F (32&deg;C). Coating has excellent recoat properties. <strong>Heat curing will provide optimum film properties. Provide ventilation when firing unit for the first time after painting.</strong></p> <p><strong>Cleanup</strong></p> <p>Clean up tools with acetone, MEK or toluene.</p> <p><strong>Storage</strong></p> <p>Store in cool, dry place with temperature between 50&deg;F and 100&deg;F (10&deg;C and 38&deg;C).</p> <p><strong>Precautionary Information</strong></p> <p><strong>WARNING</strong>: Flammable Liquid and Vapor Keep away from heat, sparks and flame. Vapors may cause flash fire. Do not breathe vapors or spray mist. Avoid contact with eyes, skin and clothing. Use with adequate ventilation during mixing and application. Observe all safety precautions and follow procedures described in OSHA regulations. Do not paint on hot surfaces.</p> <table border="1" cellpadding="2" cellspacing="1"> <tbody> <tr> <td><strong>Characteristics</strong></td> <td><strong>Thurmalox 270 Aerosol </strong></td> </tr> <tr> <td>Generic Type</td> <td>Silicone</td> </tr> <tr> <td>Color</td> <td>Black, Satin Black and custom colors (see stove paint colors at <a href="https://net4sale.com/stove-paint-colors">www.Net4Sale.com</a>)</td> </tr> <tr> <td>Finish</td> <td>Low sheen, satin black, metallic and clear gloss</td> </tr> <tr> <td>Temperature resistance</td> <td>&nbsp;</td> </tr> <tr> <td align="right">Continuous&nbsp;&nbsp;</td> <td>1000&deg;F (538&deg;C)</td> </tr> <tr> <td align="right">Intermittent&nbsp;&nbsp;</td> <td>1200&deg;F (649&deg;C)</td> </tr> <tr> <td>Theoretical coverage per 12 oz. can</td> <td valign="top">7-8 square feet per can</td> </tr> <tr> <td>Application temperature @ 50% RH</td> <td valign="top">60-90&deg;F (16-32&deg;C)</td> </tr> <tr> <td>Drying time @ 70&deg;F (21&deg;C) 50% RH</td> <td>&nbsp;</td> </tr> <tr> <td align="right">To touch&nbsp;&nbsp;</td> <td>15-20 minutes</td> </tr> <tr> <td align="right">To handle&nbsp;&nbsp;</td> <td>20-30 minutes</td> </tr> <tr> <td align="right">To recoat&nbsp;&nbsp;</td> <td>1-2 hours</td> </tr> <tr> <td>Cure time</td> <td>fire unit for full cure (after 24 hour air dry)</td> </tr> <tr> <td>Shelf life</td> <td>1 year</td> </tr> </tbody> </table> <BR><b>Common Uses</b>:&nbsp;• Stoves (wood, coal, pellet, gas, etc.) <br />• Stove pipe <br />• Free-standing fireplaces and fireplace inserts <br />• Fireplace hoods, screens, and accessories <br />• Furnaces and heaters <br />• Engines, manifolds, mufflers <BR><b>Features</b>:&nbsp;• Withstands intense heat to 1200° F (648° C)<br />• Will not peel, flake or chalk<br />• Won’t bleach or discolor<br />• Withstands repeated thermal cycling<br />• Dries for handling in 15 minutes<br />• Long-lasting<br />• Available 12 oz. aerosol cans for touch-up<br />• Resistant to scratching and marring<BR><b>Not Recommended For</b>:&nbsp;• Immersion service<br />• Direct contact with flame<br />• Cooking surfaces<br />• Porcelain surfaces<BR><b>Surface Preparation</b>:&nbsp;To ensure optimum long term coating system performance, surfaces must be clean, dry and free from dirt, oil grease, salts, welding flux, oxides, old paint or other foreign matter.<br /><br />Prepare surface by power washing, vapor degreasing, solvent cleaning or other chemical and mechanical methods.<br /><br />Surface cleaning methods recommended will depend upon type of foreign matter to be removed and condition of substrate. Consult Dampney Technical Service for specific recommendations.<BR><b>Mixing</b>:&nbsp;Redisperse any settled pigments by stirring with a paint paddle followed by thorough mixing to a uniform consistency with an explosion-proof or sir-driven power mixer. Do not open containers until ready to use. Keep lid on container when not in use.<BR><b>Application Guidelines</b>:&nbsp;One coat of Thurmalox 270 series coatings at 1.0 mil (25 microns) is suitable for use on stoves and other hearth accessories.<br /><br />For optimum protection apply two coats of Thurmalox 270 series coatings to a dry film thickness of 1.0 mil (25 microns) per coat. Total recommended dry film thickness is 2.0 mils (50 microns).<br /><br />The number of coats of Thurmalox 270 series coatings needed depends upon service conditions of equipment. <BR><b>Application Equipment</b>:&nbsp;Apply by airless, conventional or HVLP spray methods. Application by roller is not recommended. Application by brush is also not recommended except for porous surfaces such as cast iron.<BR><b>Thinning</b>:&nbsp;Only thin Thurmalox 270 series coating with Dampney 100 thinner.<br />Note: Use of other thinners not approved by Dampney may hinder product performance and void product warranty.<BR><b>Dry Time 70° F (21° C) 50% RH</b>:&nbsp;Thurmalox 270 series coatings will air dry tack and thumb print free in 15 minutes and will dry hard in 8 to 12 hours. Allow 1 hour minimum dry time between coats at 70° F (21° C) and 1/2 hour minimum dry time between coats at 90° F (32° C). Coating has excellent recoat properties. <BR><b>Cleanup</b>:&nbsp;Thoroughly flush spray equipment and hoses immediately after use with Dampney 100 Thinner. Dismantle spray equipment and clean parts, brushes and rollers with Dampney 100 Thinner. <BR><b>Storage</b>:&nbsp;Store in cool, dry place with temperature between 50°F and 100° F (10°C and 38°C). Keep container closed when not in use. <BR><b>Precautionary Information</b>:&nbsp;WARNING: Flammable Liquid and Vapor Keep away from heat, sparks and flame. Vapors may cause flash fire. Do not breathe vapors or spray mist. Avoid contact with eyes, skin and clothing. Use with adequate ventilation during mixing and application. Wear an appropriate, properly fitted organic vapor cartridge-type respirator (NIOSH/MSHA approved) during and after application unless air monitoring demonstrates vapor/mist levels are below applicable limits. Follow respirator manufacturer’s directions for respirator use. Wash thoroughly after handling. Wear protective gloves, chemical safety goggles and impervious protective clothing. Use skin cream. In confined spaces it is required to use a positive pressure supplied-air respirator (NIOSH/MSHA approved). Use explosion-proof lights and electrical equipment. Use only nonsparking tools and equipment. Wear conductive and nonsparking footwear. Make certain all<br />electrical equipment is grounded. Observe all safety precautions and follow procedures described in OSHA regulations. See Material Safety Data Sheet (MSDS) for complete precautionary and disposal information. If instructions and warnings cannot be strictly followed, do not use this product.<br /><br />FOR INDUSTRIAL USE ONLY<BR><b>Generic Type</b>:&nbsp;Silicone<BR><b>Color</b>:&nbsp;Stainless Steel, See color card. Also available in custom colors.<BR><b>Intermittent Peak Temperature</b>:&nbsp;1200° F<BR><b>Components</b>:&nbsp;1<BR> Sat, 22 Mar 2014 08:32:00 GMT Thurmalox 270 Black http://stovepaint.com/Products/AT/View/PID/22 Joseph Aucoin 22 <b>Product Name</b>:&nbsp;Thurmalox 270 Black<BR><b>HTML Title</b>:&nbsp;High Temperature Paint<BR><b>SKU</b>:&nbsp;270<BR><b>Warning Label</b>:&nbsp;True<BR><b>Short Description</b>:&nbsp;Thurmalox 270 series coatings are high temperature, fast drying formulations specifically designed to protect stoves (wood, coal, gas, pellet, etc.), hearth equipment and other metal surfaces operating at temperatures up to 1200°F.<BR><b>SDS (Aerosol)</b>:&nbsp;<a href='/Portals/0/PropertyAgent/415/Files/16/270 Aerosol SDS 04272022.pdf'>270 Aerosol SDS 04272022</a><BR><b>SDS (Bulk)</b>:&nbsp;<a href='/Portals/0/PropertyAgent/415/Files/22/270_SDS_2022.pdf'>270_SDS_2022</a><BR><b>Data Sheet</b>:&nbsp;<a href='/Portals/0/PropertyAgent/415/Files/3/stovepaintdatasheet.pdf'>stovepaintdatasheet</a><BR><b>Application Methods</b>:&nbsp;Spray|Brush|Roll|Spray Preferred<BR><b>News Article Tags</b>:&nbsp;Thurmalox<BR><b>Available Sizes</b>:&nbsp;Aerosol|Pint|Quart|1 Gallon|5 Gallon|35 Gallon|55 Gallon<BR><b>Long Description</b>:&nbsp;<p style="text-align: left;">Thurmalox 270 series coatings are high temperature, fast drying formulations based on silicone resins and thermally stable pigments. They are formulated specifically to protect stoves (wood, coal, gas, pellet, etc.), hearth equipment and other metal surfaces operating at temperatures up to 1200&deg;F (648&deg;C). Thurmalox 270 series coatings provide outstanding adhesion, film integrity, color stability and thermal shock resistance throughout this entire temperature range. For exterior applications, use Thumalox 245 Primer on bare metal surface to seal and prevent rust.</p> <p style="text-align: left;"><strong>Recommended Uses</strong></p> <ul> <li>Stoves (wood, coal, pellet, gas, etc.)</li> <li>Stove pipe</li> <li>Free-standing fireplaces and fireplace inserts</li> <li>Fireplace hoods, screens, and accessories</li> <li>Furnaces and heaters</li> <li>Engines, manifolds, mufflers</li> </ul> <p>&nbsp;<strong>Features</strong></p> <ul> <li>Withstands intense heat to 1200&deg;F (648&deg;C)</li> <li>Will not peel, flake or chalk</li> <li>Won&rsquo;t bleach or discolor</li> <li>Withstands repeated thermal cycling</li> <li>Dries for handling in 15 minutes</li> <li>Long-lasting</li> <li>Available in quarts and gallons</li> <li>Resistant to scratching and marring</li> </ul> <p>Thurmalox 270 series coatings are available in multiple colors. See 270 Series available&nbsp;at<em> <a href="https://net4sale.com/high-temperature-stove-paint">www.Net4Sale.com</a>.</em></p> <p><strong>Not Recommended For:</strong></p> <ul> <li>Immersion service</li> <li>Direct contact with flame</li> <li>Cooking surfaces</li> <li>Porcelain surfaces</li> </ul> <p style="text-align: left;"><strong>Surface Preparation</strong></p> <ol> <li> <p style="text-align: left;">To ensure optimum long term coating system performance, surfaces must be clean, dry and free from dirt, oil grease, salts, welding flux, oxides, old paint or other foreign matter.</p> </li> <li> <p style="text-align: left;">Prepare surface by power washing, vapor degreasing, solvent cleaning or other chemical and mechanical methods.</p> </li> <li> <p style="text-align: left;">Surface cleaning methods recommended will depend upon type of foreign matter to be removed and condition of substrate. Consult Dampney Technical Service for specific recommendations.</p> </li> </ol> <p>&nbsp;</p> <p><strong>Mixing</strong></p> <p style="text-align: left;">Shake can vigorously for one minute until mixing ball begins to rattle.</p> <p>&nbsp;</p> <p><strong>Application Guidelines</strong></p> <ol> <li> <p style="text-align: left;">Hold can no closer than 10-12 inches from surface to be sprayed.</p> </li> <li> <p style="text-align: left;">Apply two light coats, allowing 10 minutes drying time between coats. Clean spray head immediately after use by turning can upside down and spraying until no more paint appears. If clogging occurs, remove spray head and clean with a fine wire. Replace carefully, pointing can and spray head opening away from you.</p> </li> <li> <p style="text-align: left;">The number of coats of Thurmalox 270 series coatings needed depends upon service conditions of equipment.</p> </li> </ol> <p><strong>Dry time</strong></p> <p style="text-align: left;">Thurmalox 270 series coatings will air dry tack and thumb print free in 15 minutes and will dry hard in 8 to 12 hours. Allow 1 hour minimum dry time between coats at 70&deg;F (21&deg;C) and 1/2 hour minimum dry time between coats at 90&deg;F (32&deg;C). Coating has excellent recoat properties. <strong>Heat curing will provide optimum film properties. Provide ventilation when firing unit for the first time after painting.</strong></p> <p><strong>Cleanup</strong></p> <p>Clean up tools with acetone, MEK or toluene.</p> <p><strong>Storage</strong></p> <p>Store in cool, dry place with temperature between 50&deg;F and 100&deg;F (10&deg;C and 38&deg;C).</p> <p><strong>Precautionary Information</strong></p> <p><strong>WARNING</strong>: Flammable Liquid and Vapor Keep away from heat, sparks and flame. Vapors may cause flash fire. Do not breathe vapors or spray mist. Avoid contact with eyes, skin and clothing. Use with adequate ventilation during mixing and application. Observe all safety precautions and follow procedures described in OSHA regulations. Do not paint on hot surfaces.</p> <table border="1" cellpadding="2" cellspacing="1"> <tbody> <tr> <td><strong>Characteristics</strong></td> <td><strong>Thurmalox 270 Aerosol </strong></td> </tr> <tr> <td>Generic Type</td> <td>Silicone</td> </tr> <tr> <td>Color</td> <td>Black, Satin Black and custom colors (see stove paint colors at <a href="https://net4sale.com/stove-paint-colors">www.Net4Sale.com</a>)</td> </tr> <tr> <td>Finish</td> <td>Low sheen, satin black, metallic and clear gloss</td> </tr> <tr> <td>Temperature resistance</td> <td>&nbsp;</td> </tr> <tr> <td align="right">Continuous&nbsp;&nbsp;</td> <td>1000&deg;F (538&deg;C)</td> </tr> <tr> <td align="right">Intermittent&nbsp;&nbsp;</td> <td>1200&deg;F (649&deg;C)</td> </tr> <tr> <td>Theoretical coverage per 12 oz. can</td> <td valign="top">7-8 square feet per can</td> </tr> <tr> <td>Application temperature @ 50% RH</td> <td valign="top">60-90&deg;F (16-32&deg;C)</td> </tr> <tr> <td>Drying time @ 70&deg;F (21&deg;C) 50% RH</td> <td>&nbsp;</td> </tr> <tr> <td align="right">To touch&nbsp;&nbsp;</td> <td>15-20 minutes</td> </tr> <tr> <td align="right">To handle&nbsp;&nbsp;</td> <td>20-30 minutes</td> </tr> <tr> <td align="right">To recoat&nbsp;&nbsp;</td> <td>1-2 hours</td> </tr> <tr> <td>Cure time</td> <td>fire unit for full cure (after 24 hour air dry)</td> </tr> <tr> <td>Shelf life</td> <td>1 year</td> </tr> </tbody> </table> <BR><b>Common Uses</b>:&nbsp;• Stoves (wood, coal, pellet, gas, etc.) <br />• Stove pipe <br />• Free-standing fireplaces and fireplace inserts <br />• Fireplace hoods, screens, and accessories <br />• Furnaces and heaters <br />• Engines, manifolds, mufflers <BR><b>Features</b>:&nbsp;• Withstands intense heat to 1200° F (648° C)<br />• Will not peel, flake or chalk<br />• Won’t bleach or discolor<br />• Withstands repeated thermal cycling<br />• Dries for handling in 15 minutes<br />• Long-lasting<br />• Available 12 oz. aerosol cans for touch-up<br />• Resistant to scratching and marring<BR><b>Not Recommended For</b>:&nbsp;• Immersion service<br />• Direct contact with flame<br />• Cooking surfaces<br />• Porcelain surfaces<BR><b>Surface Preparation</b>:&nbsp;To ensure optimum long term coating system performance, surfaces must be clean, dry and free from dirt, oil grease, salts, welding flux, oxides, old paint or other foreign matter.<br /><br />Prepare surface by power washing, vapor degreasing, solvent cleaning or other chemical and mechanical methods.<br /><br />Surface cleaning methods recommended will depend upon type of foreign matter to be removed and condition of substrate. Consult Dampney Technical Service for specific recommendations.<BR><b>Mixing</b>:&nbsp;Redisperse any settled pigments by stirring with a paint paddle followed by thorough mixing to a uniform consistency with an explosion-proof or sir-driven power mixer. Do not open containers until ready to use. Keep lid on container when not in use.<BR><b>Application Guidelines</b>:&nbsp;One coat of Thurmalox 270 series coatings at 1.0 mil (25 microns) is suitable for use on stoves and other hearth accessories.<br /><br />For optimum protection apply two coats of Thurmalox 270 series coatings to a dry film thickness of 1.0 mil (25 microns) per coat. Total recommended dry film thickness is 2.0 mils (50 microns).<br /><br />The number of coats of Thurmalox 270 series coatings needed depends upon service conditions of equipment. <BR><b>Application Equipment</b>:&nbsp;Apply by airless, conventional or HVLP spray methods. Application by roller is not recommended. Application by brush is also not recommended except for porous surfaces such as cast iron.<BR><b>Thinning</b>:&nbsp;Only thin Thurmalox 270 series coating with Dampney 100 thinner.<br />Note: Use of other thinners not approved by Dampney may hinder product performance and void product warranty.<BR><b>Dry Time 70° F (21° C) 50% RH</b>:&nbsp;Thurmalox 270 series coatings will air dry tack and thumb print free in 15 minutes and will dry hard in 8 to 12 hours. Allow 1 hour minimum dry time between coats at 70° F (21° C) and 1/2 hour minimum dry time between coats at 90° F (32° C). Coating has excellent recoat properties. <BR><b>Cleanup</b>:&nbsp;Thoroughly flush spray equipment and hoses immediately after use with Dampney 100 Thinner. Dismantle spray equipment and clean parts, brushes and rollers with Dampney 100 Thinner. <BR><b>Storage</b>:&nbsp;Store in cool, dry place with temperature between 50°F and 100° F (10°C and 38°C). Keep container closed when not in use. <BR><b>Precautionary Information</b>:&nbsp;WARNING: Flammable Liquid and Vapor Keep away from heat, sparks and flame. Vapors may cause flash fire. Do not breathe vapors or spray mist. Avoid contact with eyes, skin and clothing. Use with adequate ventilation during mixing and application. Wear an appropriate, properly fitted organic vapor cartridge-type respirator (NIOSH/MSHA approved) during and after application unless air monitoring demonstrates vapor/mist levels are below applicable limits. Follow respirator manufacturer’s directions for respirator use. Wash thoroughly after handling. Wear protective gloves, chemical safety goggles and impervious protective clothing. Use skin cream. In confined spaces it is required to use a positive pressure supplied-air respirator (NIOSH/MSHA approved). Use explosion-proof lights and electrical equipment. Use only nonsparking tools and equipment. Wear conductive and nonsparking footwear. Make certain all<br />electrical equipment is grounded. Observe all safety precautions and follow procedures described in OSHA regulations. See Material Safety Data Sheet (MSDS) for complete precautionary and disposal information. If instructions and warnings cannot be strictly followed, do not use this product.<br /><br />FOR INDUSTRIAL USE ONLY<BR><b>Generic Type</b>:&nbsp;Silicone<BR><b>Color</b>:&nbsp;Black, See color card. Also available in custom colors.<BR><b>Intermittent Peak Temperature</b>:&nbsp;1200° F<BR><b>Components</b>:&nbsp;1<BR> Sat, 22 Mar 2014 08:32:00 GMT Thurmalox 270 & 290 Series Colors http://stovepaint.com/Products/AT/View/PID/5 Joseph Aucoin 5 <b>Product Name</b>:&nbsp;Thurmalox 270 & 290 Series Colors<BR><b>HTML Title</b>:&nbsp;High Temperature Paint<BR><b>SKU</b>:&nbsp;27x-xx<BR><b>Warning Label</b>:&nbsp;False<BR><b>Short Description</b>:&nbsp;Thurmalox 270 & 290 series coatings are high temperature, fast drying formulations specifically designed to protect stoves (wood, coal, gas, pellet, etc.), hearth equipment and other metal surfaces operating at temperatures up to 1200°F. Thurmalox series coatings provide outstanding adhesion, film integrity, color stability and thermal shock resistance throughout this entire temperature range. <BR><b>SDS (Aerosol)</b>:&nbsp;<a href='/Portals/0/PropertyAgent/415/Files/5/AerosolGHS2015.pdf'>AerosolGHS2015</a><BR><b>SDS (Bulk)</b>:&nbsp;<a href='/Portals/0/PropertyAgent/415/Files/5/270_SDS_2022.pdf'>270_SDS_2022</a><BR><b>Data Sheet</b>:&nbsp;<a href='/Portals/0/PropertyAgent/415/Files/5/stovepaintdatasheet.pdf'>stovepaintdatasheet</a><BR><b>Application Methods</b>:&nbsp;Spray|Brush|Spray Preferred<BR><b>Available Sizes</b>:&nbsp;Aerosol|Quart|1 Gallon<BR><b>Long Description</b>:&nbsp;<p style="text-align: left;">Thurmalox 270 &amp; 290 series coatings are high temperature, fast drying formulations based on silicone resins and thermally stable pigments. They are formulated specifically to protect stoves (wood, coal, gas, pellet, etc.), hearth equipment and other metal surfaces operating at temperatures up to 1200&deg;F (648&deg;C). Thurmalox 270 &amp; 290 series coatings provide outstanding adhesion, film integrity, color stability and thermal shock resistance throughout this entire temperature range. For exterior applications, use Thumalox 245 Primer on bare metal surface to seal and prevent rust.</p> <p>Thurmalox 270 &amp; 290 series coatings are available in multiple colors. See 270 &amp; 290 Series available&nbsp;at<em> <a href="https://net4sale.com/high-temperature-stove-paint">www.Net4Sale.com</a>.</em></p> <BR><b>Common Uses</b>:&nbsp;• Stoves (wood, coal, pellet, gas, etc.) <br />• Stove pipe <br />• Free-standing fireplaces and fireplace inserts <br />• Fireplace hoods, screens, and accessories <br />• Furnaces and heaters <br />• Engines, manifolds, mufflers <BR><b>Features</b>:&nbsp;• Withstands intense heat to 1200° F (648° C)<br />• Will not peel, flake or chalk<br />• Won’t bleach or discolor<br />• Withstands repeated thermal cycling<br />• Dries for handling in 15 minutes<br />• Long-lasting<br />• Available 12 oz. aerosol cans for touch-up<br />• Resistant to scratching and marring<BR><b>Not Recommended For</b>:&nbsp;• Immersion service<br />• Direct contact with flame<br />• Cooking surfaces<br />• Porcelain surfaces<BR><b>Surface Preparation</b>:&nbsp;1. To ensure optimum long term coating system performance, surfaces must be clean, dry and free from dirt, oil grease, salts, welding flux, oxides, old paint or other foreign matter.<br /><br />2. Prepare surface by power washing, vapor degreasing, solvent cleaning or other chemical and mechanical methods.<br /><br />3. Surface cleaning methods recommended will depend upon type of foreign matter to be removed and condition of substrate. Consult Dampney Technical Service for specific recommendations.<BR><b>Mixing</b>:&nbsp;Aerosol Cans - Shake can vigorously for one minute until mixing ball begins to rattle.<br /><br />Bulk - Redisperse any settled pigments by stirring with a paint paddle followed by thorough mixing to a uniform consistency with an explosion-proof or sir-driven power mixer. Do not open containers until ready to use. Keep lid on container when not in use.<BR><b>Application Guidelines</b>:&nbsp;1. Hold can no closer than 10-12 inches from surface to be sprayed.<br /><br />2. Apply two light coats, allowing 10 minutes drying time between coats. Clean spray head immediately after use by turning can upside down and spraying until no more paint appears. If clogging occurs, remove spray head and clean with a fine wire. Replace carefully, pointing can and spray head opening away from you.<br /><br />3. The number of coats of Thurmalox 270 series coatings needed depends upon service conditions of equipment.<br /><br />For optimum protection apply two coats of Thurmalox 270 series coatings to a dry film thickness of 1.0 mil (25 microns) per coat. Total recommended dry film thickness is 2.0 mils (50 microns).<br /><br />The number of coats of Thurmalox 270 series coatings needed depends upon service conditions of equipment. <BR><b>Application Equipment</b>:&nbsp;Apply by airless, conventional or HVLP spray methods. Application by roller is not recommended. Application by brush is also not recommended except for porous surfaces such as cast iron.<BR><b>Thinning</b>:&nbsp;Only thin Thurmalox 270 & 290 series coating with Dampney 100 thinner.<br />Note: Use of other thinners not approved by Dampney may hinder product performance and void product warranty.<BR><b>Dry Time 70° F (21° C) 50% RH</b>:&nbsp;Thurmalox 270 & 290 series coatings will air dry tack and thumb print free in 15 minutes and will dry hard in 8 to 12 hours. Allow 1 hour minimum dry time between coats at 70°F (21°C) and 1/2 hour minimum dry time between coats at 90°F (32°C). Coating has excellent recoat properties. Heat curing will provide optimum film properties. Provide ventilation when firing unit for the first time after painting. <BR><b>Cleanup</b>:&nbsp;Clean up tools with acetone, MEK or toluene.<br />Thoroughly flush spray equipment and hoses immediately after use with Dampney 100 Thinner. Dismantle spray equipment and clean parts, brushes and rollers with Dampney 100 Thinner. <BR><b>Storage</b>:&nbsp;Store in cool, dry place with temperature between 50°F and 100° F (10°C and 38°C). Keep container closed when not in use. <BR><b>Precautionary Information</b>:&nbsp;WARNING: Flammable Liquid and Vapor Keep away from heat, sparks and flame. Vapors may cause flash fire. Do not breathe vapors or spray mist. Avoid contact with eyes, skin and clothing. Use with adequate ventilation during mixing and application. Wear an appropriate, properly fitted organic vapor cartridge-type respirator (NIOSH/MSHA approved) during and after application unless air monitoring demonstrates vapor/mist levels are below applicable limits. Follow respirator manufacturer’s directions for respirator use. Wash thoroughly after handling. Wear protective gloves, chemical safety goggles and impervious protective clothing. Use skin cream. In confined spaces it is required to use a positive pressure supplied-air respirator (NIOSH/MSHA approved). Use explosion-proof lights and electrical equipment. Use only nonsparking tools and equipment. Wear conductive and nonsparking footwear. Make certain all electrical equipment is grounded. Observe all safety precautions and follow procedures described in OSHA regulations. See Material Safety Data Sheet (MSDS) for complete precautionary and disposal information. If instructions and warnings cannot be strictly followed, do not use this product.<BR><b>Generic Type</b>:&nbsp;Silicone<BR><b>Color</b>:&nbsp;Black, See color card. Also available in custom colors.<BR><b>Finish</b>:&nbsp;Low sheen, satin colors, metallic and clear gloss<BR><b>Apply To Hot Surfaces </b>:&nbsp;No<BR><b>Curing Requirements</b>:&nbsp;Fire unit for full cure (after 24 hour air dry)<BR><b>Intermittent Peak Temperature</b>:&nbsp;1200° F<BR><b>Continuous Temperature</b>:&nbsp;1000°F (538°C)<BR><b>Components</b>:&nbsp;1<BR><b>Theoretical Coverage</b>:&nbsp;7-8 square feet per aerosol can<br />40 square feet per quart<br />100 to 120 square feet per gallon<BR><b>Application Temperature</b>:&nbsp;60-90°F (16-32°C)<BR><b>Drying Time to Touch</b>:&nbsp;15-20 minutes<BR><b>Drying Time to Recoat</b>:&nbsp;1-2 hours<BR><b>Drying Time to Handle</b>:&nbsp;20-30 minutes<BR><b>Weight</b>:&nbsp;Aerosol Cans - 16 oz.<br />Quart - 5 lbs.<br />Gallon - 12 lbs.<BR> Sat, 22 Mar 2014 08:32:00 GMT